Mihran

Production Technology Mihran ™ - die plate parapet (tops) from molded polymer with sawdust liners (plates window sill a table-top form from polymer of concrete with wood-shaving by the stitches-in) . The use of technology is possible in the manufacture of slabs having the correct geometrical shape. polished surface of the plate is formed inside the technological form during the crystallization process, which limits the number of polished surfaces. The main filler polymer is crushed natural stone. The use of natural marble and granite chips a fraction of the strength and stiffness, limited color variety of products. The technology allows the natural color of marble - a white-gray, gray, granite colors - red-brown, black and green. Tonality surface is achieved in the process of crushing and screening aggregate, the main criterion is chosen faction. Preservation of the natural colors of natural stone does not require the addition of dyes and colored pigments. The use of chipboard is a technical requirement of technology, which is an element of reinforcement. liner gives the product flexibility and eliminates the fragility of the crystallized polymer. Each product is sealed liner layer compound. Mihran ™ Every product individually. molds manufactured according to individual sizes designed product. window-sill plate - an element of window design, the regulatory construction parts, installed in the base window opening inside the room, connecting and hiding the lower mounting joint window block in the window opening. Under the parapet slab is often placed space heaters, not only because there is a niche and that with the help of parapet slabs increase the thickness of the warm air layer in the area of ??the window opening. window-sill plate participates in the convection current of warm air inside the dwelling. The properties of products. Polished gloss finish products created by the manufacture does not require additional grinding and polishing. Mihran Products ™ outperforms strength of wood and plastic products, and at the same time has the plasticity and elasticity. Preserving the noble appearance of the inherent product of natural stone, it is devoid of such shortcomings as the fragility and porosity of the surface. The products are resistant to mechanical defects, rot, do not decompose, are not deformed by changing the temperature; products made of polymer solid, have insulating properties, Polymer base products water-resistant, has a repellent properties when exposed to dirt, oil, water can be installed metal fixings and brackets, as in the manufacture and installation of products on the site ; Color Preservation in time, does not require additional painting, varnishing. Easy to use - do not require special equipment maintenance, ecologically pure and chemically inert product. Manual of products from marble and granite chips on a polymer base. Appointment of products made of polymer technology Mihran ™ - use as a parapet slabs and countertops inside the premises. allowed to use products in indoor non-heated without access of moisture. The products are polished front surface in accordance with TU 2292-001-13141000-00. In the operation of products for the care of the surface is allowed the use of polishes for furniture and other funds earmarked for this purpose. Surface must be done after the removal of debris and dust with a soft lint brush. polish applied with a soft clean cloth. Do not use for surface treatment products, metal brushes, abrasives, alkalis, solvents and other active chemicals.