Linked nuts and rivets

Rivet Nuts and zaklepkizanimayut important place in any building. Because no building can not be completed without the so-called construction fasteners. The importance of fasteners, such as riveting nuts and rivets, highlights not only to construction work, riveting nuts, for example, are used for connections of machine elements, building structures, different designs. In addition to the riveting nuts and rivets to the fasteners also include bolts, screws, studs, screws, anchors, dowels. Externally riveting nut looks like a rivet with internal threads. The interior of the riveting nuts, divided into deformed and undeformed parts. Deformable part assumes the main burden for mounting, it is due to its riveted nut attached to the surface. Rivet nuts are characterized by good working qualities, any riveting nut, guaranteed against corrosion a special chemical coating. Installing riveting nuts and does not take much time and effort. so, to install the riveting nut in the desired location will need only one working and only a few minutes time. However, it should be noted that the installation riveting nut using a special tool, it is handmade with a sliding panel metric stud. The very process of assembly riveting nut looks like, riveting nut is screwed onto the stud metric, then, metric stud enters the nut in the hole where the nut and decompressed. In this case, the surface which carries the riveting nut is not damaged, which significantly expands the scope of the fastener. After the implementation of assembly by riveting nuts can be taken into account and decorative aspects of the work. Produced riveting nuts and rivets are usually made of aluminum, are also popular materials such as stainless or galvanized steel. The outer surface of riveting nuts may have a cylindrical, knurled or hexagonal shape. Rivet nuts are also divided into hiding and flat. Rivet nuts and rivets did not appear in the plain, they were preceded by the so-called Bonki. They were a fairly primitive structure with a number of constructive and practical shortcomings, so to install a Bonki, it was necessary to have access to its two ends. A need for further roll and cleaned already installed Bonk, greatly complicates the process. Using a riveting nut simplifies this task. If at work, in which technology is used welding nuts, riveted nut use, the productivity in such activities will inevitably increase, and the savings will be sufficient to note that the use of riveting nuts as a progressive and productive step forward.