Mineralovoloknistye ceilings

Panels mineralovoloknistyh ceilings consist of: mineral wool, perlite, clay binder additives - starch, latex, waste paper and gypsum. Suspended ceilings mineralovoloknistyh panels can not only be flat (A, B), but, for example, cellular (C) should be noted that mineral fiber used for the manufacture of this group of ceilings - it is stone wool. And although the glass is also a group of materials generally accepted mineralovoloknistyh ceiling stone wool called mineralovoloknistymi and fiberglass to make a separate group. This well-established classification will follow us. Enormous attention in the production of mineral fiber ceiling on the binder. Depending on what more starch or latex depend on product specifications, ie their moisture. If more latex, it is water-resistant panel that can be used in areas with humidity up to 95-99%. And if the predominant starch, then with high humidity panel sag. Latex is more expensive than starch, and therefore water-resistant panels more expensive products with a low moisture resistance. Panels of mineral fibers are of high fire safety and acoustic characteristics (high sound absorption). Colours of panels may vary up to black (for the cinema halls, for example). Nomenclature of surface texture provides a wide choice for designers and architects - smooth, mikroperforirovannye or textured surface, clear printed geometric designs, graphic design, decoration design edges, and lattice panels with open cells. All this makes it possible to create individual tracks from the ceiling tiles. Designer ceilings allow to perform any exclusive interiors, both residential and public and commercial interiors. Designer and manufacturer in the Commonwealth can create three-dimensional ceilings of almost any complexity, with built-in lighting, with staggered levels, etc. The layout of the panels can be a visible or concealed suspension system, free docking (corridor), wire or plate. Fig. presented interiors, executed their mineralovoloknistyh panels, illustrations speak louder than words about the current capabilities of this material. Mineral fiber produces several types of panels: in addition to traditional, laminated, keramovidnyh of mineral fibers, combined, and the soft fibers. Traditional panels that act as speakers, have a rough surface with grooves of different shapes. To make the surface color, panel primed and coated with paint. Note that the staining panels alone can lead to loss of their acoustic properties. Hygienic Plate bactericidal paint color, which limits the growth of bacteria on the surface of the ceiling. At the surface of laminated panels may be faced with a variety of materials: textured fabric, a special glass (including colored) aluminum foil (which may be covered with vinyl, treated with bactericidal or fungicidal), smooth polyester film (repels dust) and other coatings. Panels of keramovidnyh mineral fibers distinguishes maximum resistance to high temperatures, they have passed the test with steam temperatures up to 135oC. The panels are resistant to reactive vapors, corrosion and humidity, are designed for installation in harsh industrial and marine applications, swimming pools. Can be installed in unheated rooms. They are composed of cellulose and mineral fiber, special organic binders and inorganic fillers. Panel surface primed and painted. The panels withstand 100% relative humidity at 40oC. Combined panel is a sandwich with a core of mineral wool covered with smooth or perforated metal. These products provide a good combination of positive properties of mineral fiber with the optical appeal of the metal. Ceilings are made of soft fibers are characterized by the highest sound absorption and are a good solution for schools or hospitals. Additional advantages of plates of soft fiber - high humidity and the ability to create curved surfaces. The front surface plates painted for decorative effect. Mineralovoloknistye panels installed on the suspension system. Their dimensions 600x600 mm, mm, etc. 1200h600, weight: 3 to 8 kg / m 2, thickness of 12-25 mm. Plates can be mounted indoors when it dried, plastering and painting work was completed, built and glazed windows and doors. The heating system must work to provide a standard operating temperature of 15-30oC. Relative humidity should not exceed 90%. In areas with temporarily or permanently wet to take special measures. It should be remembered that the plates with a particular relative humidity, have a guaranteed performance in a given relative humidity.