Floor slabs and roof slabs of polystyrene

Floor slabs and roof slabs of polystyrene - is one of the most modern types of overlap. The basic property of floor slabs and roof slabs of polystyrene is their low weight, which causes small load bearing frame and foundation of the building. In addition, they are characterized by high physical, thermal and acoustic properties, as well as ease of installation. On the basis of polystyrene designed three overlapping systems: Mounting system overlap - this is when the overlap be established bearing beams, and then filling the elements - the slab. Polumontazhnaya system - installed mounting plates, and over the filling layer of concrete. Monolithic system overlaps is very simple system, characterized by installing corrugated roofing sheets. Slabs are made to order and generally available for spans of up to 4,0 m (thickness of 140 mm and weighing 150 kg / m 2), length 4,0 - 5,0 m (thickness of 180 mm and weighing 190 kg / m 2) and 5,0 - 6,0 m (thickness of 220 mm and weighing 230 kg / m 2). On special request may be made board and other sizes. Slab of polystyrene can be mounted at any time of year with small forklifts, and even manually. When using the floor slabs and roof slabs do not require the application of the plaster (rather putty cement grout or adhesive for ceramic tiles), resulting in significantly reduced time finishing works. Although this new material for the floor, but floor slabs and roof slabs of polystyrene has already won the sympathy of local builders, as a reliable and practical material.