Treatment of wood infested houses mushrooms

Due to persistence of fungal organisms range of measures to antiseptic repair should be performed very carefully, in a strict sequence. Everything, even the slightly affected areas of wood should be removed. After this construction is well dried, antiseptic, and again dried (in crude wood preservatives is not absorbed). Antiseptirovanie best performed three times at a constant or systematic airing. As mentioned, many antiseptic solutions corrode metals, so the metal parts is recommended prior to treatment with oil paints to paint two or three. In order not to spread the fungal spores, for removing diseased wood under the seat is recommended to lay plastic sheeting, oilcloth, or a thick cloth. If the treatment is carried out at the top of the wall, the wall itself, and below the treated site should be anything closed to her did not get fungal spores. After processing all the cut wood (wood chips, sawdust, chips) should be collected in a metal container and burn or bury at a depth of 70 cm, A Place in the cut wood antiseptic, dry, and only then put in place antiseptirovannuyu and dried piece. Repaired the place to be reliably protected from moisture and create the opportunity for continuous ventilation. Dry antiseptics and preservatives based on kerosene or turpentine, or their mixtures are not dried. On the horizontal surfaces of various designs can be applied dry antiseptic, mounds of layers desired thickness, taking measures that they will not pour.